Splash Blackout Swallows and Swifts Blue Roller Blind

The fitting type you choose tells us exactly what it is you've measured, so we can size your blind perfectly.

Recess Fitting

For blinds inside a window recess, measure the width and drop in 3 places and use the smallest measurement for each. Don't make any deductions or allowances yourself, just select 'recess fitting' and we’ll make the necessary deductions for a perfect fit.

Exact Fitting

Usually used when fitting blinds outside the recess (e.g., on the wall). Provide the full width and height you want, including all the blind's components — we won’t make any adjustments.

A Roller Blind's components protrude from either side of the roller tube, so the actual fabric is narrower than the full width of the blind including its parts.

Fabric Width

Choose this if the width measurement you've entered is the precise width you'd like the blind's fabric to be. The brackets and components will not be included in the final width, so overall your blind will be roughly 35mm wider than the measurements you've given.

Bracket to Bracket

Choose this if your width measurement is the width you'd like the blind to be including all of its parts. The fabric will be roughly 35mm narrower than the width measurement you provide.